Home » Sump Pumps Lakewood

Sump Pumps Lakewood

A sump pump in Lakewood, Washington, can do your home or business a lot of good, and Hunt’s Services can assist as you install or repair it. Our licensed plumbers in Lakewood have considerable experience with sump pump installations and maintenance, ensuring your unit is functioning at full capacity and preventing your home or business from flooding.

As you may know, sump pumps remove water from your building’s lowest point, so it doesn’t flood. Any moisture entering your structure could significantly damage your floors, walls, and belongings, so having a protective measure in place is advisable.

Hunt’s Services is available at 253-533-7500 to assist with all your sump pump installation questions and concerns. You can also book an appointment with us in Lakewood, WA, and anywhere else in Pierce County.

Why Buy a Sump Pump?

Sump pumps aren’t necessary for every home or business owner in Western Washington. For example, if you live at a higher elevation, there’s reduced opportunity for water to enter your structure, and a pump might not be worth the investment.

However, buildings sitting in lower-lying areas could benefit significantly from a sump pump installation. Water always runs downhill, so if your home sits at a low elevation, there’s a chance water is running toward it after a rainfall. You could be at risk if you’ve ever noticed puddles in your driveway or near your house after a storm.

You might also consider a sump pump if you ever notice moisture in your basement or crawlspace that isn’t coming from a pipe. A burst pipe is an entirely different type of issue, but if you can’t explain the presence of water in your basement, it could be coming from the ground, and a sump pump can help you clear it.

However if you think the water you see is from a cracked or broken sewer or water line. Hunt’s Services has many options for sewer line repair and burst pipe replacement services for Lakewood homes and businesses.

Sump pumps are valuable in many scenarios. Call Hunt’s Services at 253-533-7500 to find out if you could benefit from a sump pump installation in Lakewood, Washington.

CLIENT
TESTIMONIALS

The Basics of a Sump Pump

So, what does a sump pump do? Learning the basics of these devices is a good idea before making a purchase so you know if they’re suitable for your home or business.

Sump pump installations begin with a pit. Your technician will dig a hole at your building’s lowest point and install the pump in that location. Once the device is in place, it removes moisture from the structure before it can cause flooding or create an environment where mold can form.

These pumps only activate when necessary, making them energy efficient. Each sump pump is equipped with a float switch, which turns the unit on when it encounters water. Water can get into the pit during a period of intense rainfall or sudden snowmelt in Puget Sound.

Your technician will install the sump pump at the building’s lowest point because water will first enter the structure at that location. The pump is entirely automated through its float switch, and it pushes water far away from your home or business to a separate drainage area when it activates.

Give Hunt’s Services a call at 253-533-7500 to learn more. Our technicians are available to serve you in Lakewood, Washington, and numerous other cities and towns in Pierce, King, Thurston and Kitsap Counties.

Choosing a Sump Pump

Finally, selecting the correct type of sump pump for your building is essential. You don’t want to overspend on a sump with a massive amount of power if you don’t need it, so figuring out the best size for your property is a good idea.

Residential sump pumps are cheaper than commercial pumps. They also generate a lower flow rate because of their reduced horsepower, but this flow rate is still usually good enough to protect houses from flooding.

If you go with a residential pump, it will likely have 1/4 horsepower, which is enough to remove 1,800 to 2,000 gallons of water hourly. You probably won’t need much more than that for your home unless you have a massive house.

Commercial sump pumps often have 1/2 horsepower, allowing them to remove over 5,000 gallons of water from your building per hour. This increased flow rate enables these pumps to protect larger structures from flooding.

Your pump could have a couple of optional features, as well. Many pumps are equipped with an alarm that will notify you when the float switch activates so you can monitor the situation. Some sump pumps also have a battery backup that keeps them running during a power outage.

Call Hunt’s Services to learn more about the sump pumps available in Lakewood, Washington.

Book Your Appointment

Hunt’s Services is standing by at 253-533-7500 to assist with your sump pump installation. Reach out today to book your appointment and ensure your home or business is as safe as possible from flooding during the next storm.

Committed
to Our Community

We proudly support local programs and give back through outreach because great service starts with being a good neighbor.

Straightforward
Pricing

No hidden fees, no surprises—just honest, upfront pricing you can trust. We believe in clear communication and fair rates, so you know exactly what to expect before any work begins.

Trusted
Technicians

Experienced professionals you can count on, delivering reliable, quality work every time.

On-time
service

We value your time and always strive to arrive promptly, ensuring your service is completed on schedule without delays or surprises.

Family-owned
and operated

As a family-owned and operated business, we take pride in treating every customer like part of our own family, delivering honest, personalized care you can trust.

Trusted
plumbers

Our team of experienced plumbers is dedicated to providing dependable, high-quality workmanship that you can rely on for lasting solutions.

CALL NOW!

253-533-7500